Brass rod Ø42-400mm Round rod Brass round material 2.0401 CuZn39Pb3 Ms58 Brass round rod
zoom_out_map
chevron_left chevron_right

Brass rod Ø0.4-400mm Round rod Brass round material 2.0401 CuZn39Pb3 Ms58 Brass round rod 0.02-1meter (length : 0.02 Meter, diameter : 32mm)

check 88 Product Sales
  • Diameter from 0.4mm to 400mm; length: from 0.02 meter up to 1 meter.
  • Applications: Fittings and tap handles; screws and nuts; valve bodies; parts for electrical engineering and general mechanical engineering; cable clamps; ballpoint pen tips.
  • If your required length/width is not listed, please select the next larger length/width. Leave a comment with the desired length/width with your order. We will cut to your size.
  • Dimensional tolerances: +/-2mm.
  • Can't find the sizes you want? Just get in touch with us! We will be happy to help you with your request.

£5.03 Tax included

5.03 Tax excluded

 Customer ratings and reviews
Durchschnittliche Bewertung
review(s): 0
Brass round bars made from material 2.0401 (CuZn39Pb3/Ms58) feature a length tolerance of +/-2mm. Please note: sawn bar ends may be sharp and not deburred; supplied bars may look different from the production-length images shown. If you require other steel grades or dimensions, contact our sales team for a personalized offer. These bars are in stock and ready for shipment within 2-3 business days. Delivery times depend on the parcel service—please refer to our FAQ for details. CuZn39Pb3 brass bars consist mainly of copper (57-59%), with lead (2.5-3.5%) and zinc (36-40%) as major components. This material is easily hot formable, achieves high hardness and strength through cold working (though cold formability is limited by risk of stress corrosion cracking), and offers excellent machinability. It is suitable for both soft and hard soldering, stamping, and mechanical polishing (not suitable for electrolytic or chemical polishing). Due to the lead content, welding options are limited—resistance welding is recommended, while manual arc, gas, TIG, and MIG welding methods should be avoided. The material has relatively low corrosion resistance, especially against water, salt solutions, and organic liquids. Typical applications include fittings, tap handles, screws, nuts, valve bodies, parts for electrical and general engineering, cable clamps, and ballpoint pen tips. Key properties: - Excellent hot formability - Outstanding machinability - Suitable for soldering and stamping - Good for mechanical polishing - Limited weldability (best with resistance welding) - Low corrosion resistance to aggressive environments Chemical composition (approx. in %): Cu: 57.0–59.0, Zn: remainder, Pb: 2.5–3.5, Ni: 0.3, Fe: 0.5, Sn: 0.3, Al: 0.05, Others: 0.2 Order brass round bars from Evek GmbH quickly and easily online. Our team is available to assist with any questions you may have.
Evek GmbH
7039-152866
4069235434239
Type
Round bar
material
Brass
operation area
Fittings and tap handles; screws and nuts; valve bodies; parts for electrical engineering and general mechanical engineering; cable clamps; ballpoint pen tips
Material number
2.0401
US
C38500
Alloy
CuZn39Pb3
density
8.47 g/cm³
Melting point
888 °C
Thermal conductivity
123 W/(m-K)
Electrical resistance
0.066 Ω mm²/m
Electrical conductivity
15 MS/m
tensile strenght
min. 360 MPa
surface
smooth (may contain handling or storage marks)
You might also like
 Reviews

Be the first to write your review !