Brass rod Ø42-400mm Round rod Brass round material 2.0401 CuZn39Pb3 Ms58 Brass round rod
zoom_out_map
chevron_left chevron_right

Brass rod Ø0.4-400mm Round rod Brass round material 2.0401 CuZn39Pb3 Ms58 Brass round rod 0.02-1meter (length : 0.02 Meter, diameter : 8mm)

check 88 Product Sales
  • Diameter from 0.4mm to 400mm; length: from 0.02 meter up to 1 meter.
  • Applications: Fittings and tap handles; screws and nuts; valve bodies; parts for electrical engineering and general mechanical engineering; cable clamps; ballpoint pen tips.
  • If your required length/width is not listed, please select the next larger length/width. Leave a comment with the desired length/width with your order. We will cut to your size.
  • Dimensional tolerances: +/-2mm.
  • Can't find the sizes you want? Just get in touch with us! We will be happy to help you with your request.

£0.70 Tax included

0.7 Tax excluded

 Customer ratings and reviews
Durchschnittliche Bewertung
review(s): 0
Length tolerance for this product is +/-2mm. Please note: The ends of sawn brass bars may be sharp and not deburred. Product photos display bars in their production length; the supplied sawn bars may look different. If you require different steel grades or dimensions, feel free to contact us. Our sales team will be happy to provide an offer from our available stock or delivery program. - No production time, as the item is in stock. - Preparation for shipping takes 2-3 working days. - Delivery time varies depending on the parcel service. Please refer to our FAQ for more details. The brass round bar (material 2.0401, CuZn39Pb3, Ms58) consists mainly of copper (about 57-59%), lead (2.5-3.5%), and the remainder is zinc (approx. 36-40%). This alloy is easily hot formable and achieves high hardness and strength through cold working, although cold formability is somewhat limited due to potential stress corrosion cracking. It offers excellent machinability and is suitable for both soft and hard soldering. The bar can be stamped and mechanically polished but is not suitable for electrolytic or chemical polishing. Evek GmbH supplies brass round bars in various sizes at competitive prices, with fast and reliable worldwide shipping. Due to its lead content, welding options for this material are limited. It is not recommended to use manual arc welding, gas welding, TIG, or MIG welding. Resistance welding is best suited for this brass grade. It also has relatively low resistance to corrosion, especially in salt solutions, organic liquids, and water. Typical applications of brass round bar CuZn39Pb3 include: - Fittings and tap handles - Screws and nuts - Valve bodies - Parts for electrical engineering and mechanical engineering - Cable clamps - Ballpoint pen tips Key properties: - Excellent hot formability - Very good machinability - Suitable for soft and hard soldering - Good for punching and mechanical polishing - Limited weldability (resistance welding recommended) - Low corrosion resistance to aggressive environments such as water, salt solutions, and organic liquids Purchase brass round bars easily at any time through the Evek GmbH online store. For any questions, our team is ready to assist you. Chemical composition (in %): | Cu | Zn | Pb | Ni | Fe | Sn | Al | Others | |--------|--------|--------|-----|-----|-----|------|--------| | 57-59 | Rest | 2.5-3.5| 0.3 | 0.5 | 0.3 | 0.05 | 0.2 |
Evek GmbH
7014-162754
4069235438589
Type
Round bar
material
Brass
operation area
Fittings and tap handles; screws and nuts; valve bodies; parts for electrical engineering and general mechanical engineering; cable clamps; ballpoint pen tips
Material number
2.0401
US
C38500
Alloy
CuZn39Pb3
density
8.47 g/cm³
Melting point
888 °C
Thermal conductivity
123 W/(m-K)
Electrical resistance
0.066 Ω mm²/m
Electrical conductivity
15 MS/m
tensile strenght
min. 360 MPa
surface
smooth (may contain handling or storage marks)
You might also like
 Reviews

Be the first to write your review !