Brass rod Ø42-400mm Round rod Brass round material 2.0401 CuZn39Pb3 Ms58 Brass round rod
zoom_out_map
chevron_left chevron_right

Brass rod Ø0.4-400mm Round rod Brass round material 2.0401 CuZn39Pb3 Ms58 Brass round rod 0.02-1meter (length : 0.02 Meter, diameter : 0.4mm)

check 88 Product Sales
  • Diameter from 0.4mm to 400mm; length: from 0.02 meter up to 1 meter.
  • Applications: Fittings and tap handles; screws and nuts; valve bodies; parts for electrical engineering and general mechanical engineering; cable clamps; ballpoint pen tips.
  • If your required length/width is not listed, please select the next larger length/width. Leave a comment with the desired length/width with your order. We will cut to your size.
  • Dimensional tolerances: +/-2mm.
  • Can't find the sizes you want? Just get in touch with us! We will be happy to help you with your request.

£0.70 Tax included

0.7 Tax excluded

 Customer ratings and reviews
Durchschnittliche Bewertung
review(s): 0
Length tolerance: +/-2mm. Please note: The ends of sawn brass bars may be sharp and not deburred. The product photos display the bars in their production length; the supplied sawn bars may vary in appearance. If you need a different steel grade or dimensions, contact us and our sales team will provide a suitable offer from our stock or delivery program. - Production time: None, item is in stock. - Preparation for shipment: 2-3 business days. - Delivery time: Depends on the parcel service. Please refer to our FAQ. The brass round bar (material number 2.0401, CuZn39Pb3/Ms58) consists of approximately 57-59% copper, 2.5-3.5% lead, and the balance zinc. This material is easily hot formable and achieves high strength and hardness through cold forming, although cold formability is limited due to the risk of stress corrosion cracking. Brass round bar offers excellent machinability and is suitable for both soft and hard soldering. It can be stamped easily and polished mechanically, but is not suitable for electrolytic or chemical polishing. Evek GmbH supplies brass round bars in various sizes at competitive prices, providing reliable and straightforward worldwide shipping. Due to its lead content, welding of this brass is limited. It is not suitable for manual arc welding, gas welding, TIG, or MIG processes; resistance welding is recommended. The corrosion resistance of brass 2.0401 Ms58 is relatively low, particularly against salt solutions, organic fluids, and water. Typical applications for CuZn39Pb3 brass round bar include: - Fittings and tap handles - Screws and nuts - Valve bodies - Electrical and general mechanical engineering parts - Cable clamps - Ballpoint pen tips Key properties: - Excellent hot formability - Very good machinability - Suitable for soft and hard soldering - Good stamping and mechanical polishing capabilities - Limited weldability (best with resistance welding) - Relatively low corrosion resistance to aggressive media You can easily purchase brass round bars from Evek GmbH through our online store, available 24/7. For additional questions, feel free to contact us. Chemical composition (in %): Cu: 57.0–59.0 | Zn: remainder | Pb: 2.5–3.5 | Ni: 0.3 | Fe: 0.5 | Sn: 0.3 | Al: 0.05 | Others: 0.2
Evek GmbH
10021-162837
4069235439418
Type
Round bar
material
Brass
operation area
Fittings and tap handles; screws and nuts; valve bodies; parts for electrical engineering and general mechanical engineering; cable clamps; ballpoint pen tips
Material number
2.0401
US
C38500
Alloy
CuZn39Pb3
density
8.47 g/cm³
Melting point
888 °C
Thermal conductivity
123 W/(m-K)
Electrical resistance
0.066 Ω mm²/m
Electrical conductivity
15 MS/m
tensile strenght
min. 360 MPa
surface
smooth (may contain handling or storage marks)
You might also like
 Reviews

Be the first to write your review !