Brass rod Ø42-400mm Round rod Brass round material 2.0401 CuZn39Pb3 Ms58 Brass round rod
zoom_out_map
chevron_left chevron_right

Brass rod Ø0.4-400mm Round rod Brass round material 2.0401 CuZn39Pb3 Ms58 Brass round rod 0.02-1meter (length : 0.02 Meter, diameter : 15mm)

check 88 Product Sales
  • Diameter from 0.4mm to 400mm; length: from 0.02 meter up to 1 meter.
  • Applications: Fittings and tap handles; screws and nuts; valve bodies; parts for electrical engineering and general mechanical engineering; cable clamps; ballpoint pen tips.
  • If your required length/width is not listed, please select the next larger length/width. Leave a comment with the desired length/width with your order. We will cut to your size.
  • Dimensional tolerances: +/-2mm.
  • Can't find the sizes you want? Just get in touch with us! We will be happy to help you with your request.

£1.23 Tax included

1.23 Tax excluded

 Customer ratings and reviews
Durchschnittliche Bewertung
review(s): 0
Please note: Length tolerance is +/-2mm. Caution – the ends of sawn bars may be sharp and not deburred. Product photos show bars at production length; the supplied sawn bars may look different. If you require a different steel grade or size, contact us and our sales team will provide a custom offer from our stock or supply program. - No production time – product is in stock. - Order preparation: 2-3 business days. - Delivery time depends on the parcel service; see our FAQ for details. Our brass round bar (material number 2.0401, CuZn39Pb3) is an alloy consisting of approximately 57-59% copper, 2.5-3.5% lead, and the remainder zinc (36-40%). This material is easy to hot form, while high hardness and strength are achieved via cold forming, though cold formability is limited due to possible stress corrosion cracking. The brass round bar is highly machinable and suitable for both soft and hard soldering. It is easy to stamp and can be mechanically polished, but is not suitable for electrolytic or chemical polishing. Evek GmbH supplies brass round bars in various dimensions at competitive prices, with fast and straightforward worldwide shipping. Please note, due to its lead content, this brass alloy has limited weldability. It should not be welded using manual arc, gas, TIG, or MIG welding. Resistance welding is recommended. The corrosion resistance of this material is relatively low; it is not suitable for use with salt solutions, organic liquids, or water. Typical applications for CuZn39Pb3 brass round bar include: - Fittings and tap handles - Screws and nuts - Valve bodies - Components for electrical and general mechanical engineering - Cable clamps - Ballpoint pen tips Key features: - Excellent hot formability - Very good machinability - Suitable for both soft and hard soldering - Good for punching and mechanical polishing - Limited weldability (best by resistance welding) - Low corrosion resistance to aggressive media (such as water, salt solutions, and organic liquids) You can conveniently purchase brass round bar from Evek GmbH online at any time. For questions, feel free to contact us. **Chemical Composition (in %):** Cu: 57.0–59.0 | Zn: remainder | Pb: 2.5–3.5 | Ni: 0.3 | Fe: 0.5 | Sn: 0.3 | Al: 0.05 | Others: 0.2
Evek GmbH
7022-162768
4069235438725
Type
Round bar
material
Brass
operation area
Fittings and tap handles; screws and nuts; valve bodies; parts for electrical engineering and general mechanical engineering; cable clamps; ballpoint pen tips
Material number
2.0401
US
C38500
Alloy
CuZn39Pb3
density
8.47 g/cm³
Melting point
888 °C
Thermal conductivity
123 W/(m-K)
Electrical resistance
0.066 Ω mm²/m
Electrical conductivity
15 MS/m
tensile strenght
min. 360 MPa
surface
smooth (may contain handling or storage marks)
You might also like
 Reviews

Be the first to write your review !