chevron_left
chevron_right
Welding electrodes Ø 0.8-5mm welding wire steel 70s-2 1.5125 welding rods
Welding electrodes Ø 0.8-5mm welding wire steel 70s-2 1.5125 welding rods
- 100% no China imports (pay attention to high price differences)
- Our products are mostly made in Germany
- High quality at the best prices.
- TOP rating & service
Technical specifications:
| Brand: | Evek |
| Country and Region of Production: | Germany |
| Manufacturer number: | Not applicable |
| Type: | Welding electrodes; Welding rod |
| Standard classifications: | |
| ASME SFA-A5.18: | ER70S-2 |
| Material number: | 1.5125 |
| DIN8559: | SG2 |
| EN ISO440: | G3Si1 |
Description:
ER70S-2 is a multi-deoxidized wire that contains small amounts of zirconium, titanium and aluminum in addition to the manganese and silicon deoxidizing agents that are characteristic of the steel wire group. This wire can be used for MIG or TIG welding of all types of soft and carbon steels, resulting in welds of the highest quality with minimal porosity even over rust and mill scale. The ER70S-2 is popular for out-of-position welding with small diameter wires using short-circuit arc transfer. MIG welding can be performed using CO 2, argon-oxygen mixtures, or mixtures of the two.
Further information:
- Tensile strength - 550 MPa
- Offset yield strength 0.2% - 490 MPa
- Extension - 29%
- Type
- Welding electrodes
- material
- steel
- operation area
- Verbindungsschweißen an un- und niedriglegierten Stählen sowie Bau-, Feinkornbau- und Kesselstählen
- Material number
- 1.5125
- AWS
- A 5.28: ER 70S-2
- tensile strenght
- 520 N/mm²
- Stretch limit
- 420 N/mm²
- Elongation at break
- 23 %
You might also like
