-5%
Spring steel wire 0.1-10mm 1.4310 Spring wire 301 stainless 1-500...
  • Diameter: 0.1-10mm; Length: 1-200m.
  • Areas of application: spring production; Handcraft; Vehicle construction; Manufacture of electrical components; watch parts.
  • very good corrosion resistance and weldability; high strength; good mechanical properties.
  • Tensile strength 0.40 mm - 2250-2587 N/mm²; 0.70 & 0.75 mm - 1950-2242 N/mm²; 0.55 & 0.65 mm - 2000-2300 N/mm²; 0.95mm - 1900-2185N/mm²; 1.30mm - 1800-2070N/mm².
  • Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.
(5/5) on 5 rating(s)
£4.71
From: £4.71
£4.96
diameter
length
  • Type wire
  • material stainless steel
  • operation area Handicrafts,...
  • Quality standard EN 10270-3
  • Material number 1.4310
Online only
(5/5) on 4 rating(s)
£4.96
diameter
length
  • Type wire
  • operation area Household...
  • Material number 1.4765
  • EN X10CrAlSi25
  • US S44600
Copper wire blank Ø0.1-5mm Cu-ETP without varnish Uncoated Cu craft...
  • Cu-ETP; EN CW004A.
  • Diameter from 0.1mm to 5mm. Length from 2 meters to 750 meters.
  • Areas of application: Hobby area & handicrafts; Decoration; Windings & electrical conductors; Contacts, terminals & switches.
  • Density 8.93 g / cm³; Melting point 1083 ° C; Thermal conductivity 394 W / (m · K); electr. Resistance 0.018 Ω mm² / m; electr. Conductivity 57 S / m.
  • Dimension tolerances: +/- 2mm.
(4,8/5) on 4 rating(s)
£4.96
diameter
length
  • Type wire
  • material copper
  • operation area Hobby area...
  • Material number 2.0065
  • EN Cu-ETP
Titanium Grade 2 titanium rod Ø0.8-87mm titanium round rod 3.7035...

Titanium Grade 2 titanium rod Ø0.8-87mm Titanium round rod 3.7035 B348 solid shaft 0.1-2 meters

(4,8/5) on 5 rating(s)
£0.70
diameter
length
  • Type Round bar
  • material titanium
  • operation area Medicine...
  • Material number 3.7035
  • EN Titanium...
Stainless steel hexagon SW 4mm-60mm 1.4305 rod hexagon VA V2A 303...

Stainless steel hexagon SW 4mm-17mm 1.4305 rod hexagon VA V2A 303 hexagon rod

(5/5) on 4 rating(s)
£0.70
diameter
length
  • Type Hexagon
  • material stainless steel
  • operation area Architecture...
  • Material number 1.4305
  • EN X8CrNiS18-9
Copper wire Ø0.05-12mm enameled wire Cu 99.9 wnr 2.0090 craft wire...
  • Diameter: 0.05mm-5mm. Length: 2-750m.
  • Areas of application: model making; Construction of electric coils; Construction of transformers and machines; Manufacture of high frequency stranded wire.
  • Wnr. 2.0090; EN Cu-DHP; UNS C12200.
  • Electrical resistance 0.022 Ω mm² / m; electr. Conductivity 45 m / Ω • mm²; Thermal conductivity 305 W / (m · K).
  • Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.
(5/5) on 4 rating(s)
£4.96
diameter
length
  • Type wire
  • material copper
  • operation area Model...
  • Material number 2.0090
  • EN Cu-DHP
Spring steel rod 0.4-18mm stainless steel 1.4310 Aisi 301 round bar...
  • Diameter: 0.4-18mm; Length: from 0.02 up to 1m.
  • Fields of application: Spring production; vehicle construction; stamped, bent and simple deep-drawn parts.
  • If your desired length/width is not listed, please select the next larger length/width. Leave a comment with the desired length/width with your order. We will cut to your dimensions.
  • Dimensional tolerances: +/-2mm.
  • Can't find the sizes you want? Just get in touch with us! We will be happy to help you with your request.
(5/5) on 4 rating(s)
£0.78
diameter
length
Stainless steel wire Ø0.05-6mm binding wire 1.4301 garden wire 304...
  • Size: 0.05-3mm; Length: 1-200m.
  • Areas of application: jewelery and works of art; architecture and decoration.
  • excellent corrosion and acid resistance; easy to shape and polish; well suited for low-temperature applications; usable up to 600°C.
  • tensile strength 700 – 1500 N/mm²; electr. Resistance 0.73 (Ωmm²)/m; Modulus of elasticity - 200 GPa.
  • Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.
(5/5) on 4 rating(s)
£4.96
diameter
length
  • Type wire
  • material stainless steel
  • operation area Food...
  • Material number 1.4301
  • US S30400
-5%
Nichrome 0.022-10mm resistance wire 2.4869 NiCr 80/20 heating wire...

Nichrome 0.05-5mm resistance wire 2.4869 NiCr 80/20 Cronix heating wire 1-500 meters

(5/5) on 4 rating(s)
£4.71
From: £4.71
£4.96
diameter
length
  • Type wire
  • material Nickel alloy
  • operation area Manufacture...
  • Material number 2.4869
  • US N06003
Rod steel Ø0.4-110mm round rod rod Fe round material 0.1-1 meter

Rod steel round rod rod Ø0.4-110mm Fe round material 0.1-2 meters

(5/5) on 6 rating(s)
£0.70
diameter
length
  • Type Round bar
  • material steel
  • operation area Construction...
  • Material number 1.0570
  • density 7.85 kg / dm³
Stainless steel sheet strips 1.4301 flat bar 0.5x20mm-6x90mm...
  • Applications: automotive (car bodies); construction; automotive industry; food industry; sanitary equipment; chemical plant engineering;
  • Properties: good processing properties; excellent resistance to acids and corrosion; chemically resistant; excellent mechanical strength; good weldability with all electrical processes; good polishing and deep drawing properties; good heat resistance up to 600°C;
  • Didn't find the sizes you are looking for? Just contact us! We will be glad to help you with your request.
£1.40
Thickness / Strength
length
width
  • Type Flat bar
  • material stainless steel
  • Material number 1.4301
  • EN X5CrNi18-10
  • AISI 304
-5%
Stainless steel tube 0.8-12mm thin-walled capillary tube V2A 1.4301...

Stainless steel tube 4-12mm thin-walled capillary tube V2A 1.4301 around 2.0 meters

(5/5) on 4 rating(s)
£0.67
From: £0.67
£0.70
diameter
length
  • Type Capillary tube
  • material stainless steel
  • operation area Model...
  • Material number 1.4301
  • EN X5CrNi18-10
Bismuth Bi 99.95% Element 83 Bars 5grams to 5kg Pure Metal Bismuth...
  • Weight from 5gr to 5kg.
  • Areas of application: as a component of low-melting alloys; as a substitute for lead in free-cutting steels; as a material for strong permanent magnets
  • If your desired length/width is not listed, select the next larger length/width. Leave a comment on your order with the length/width you want. We cut according to your measurements.
  • Dimensional tolerances: +/-2mm.
  • Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.
(5/5) on 4 rating(s)
£4.96
Weight
Titanium wire Grade 2 Ø0.2-8mm 3.7035 Titanium A 5.16 ER Ti 2...
  • Diameter from 0.5mm to 8mm. Length from 1 meter to 50 meters.
  • Areas of application: as a filler metal for welding pure titanium; medicine (implants, medical instruments, dental applications); Aerospace; Shipbuilding; chemical industry (tanks, valves, fittings, pumps); watch and jewelry manufacture.
  • Wnr. 3.7035; EN titanium grade 2; US R50120; AWS A 5.16: ER Ti 2.
  • tensile strength min. 345 MPa; yield strength min. 275 MPa; elongation at least 20%; Hernia reduction min. 30%.
  • Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.
(5/5) on 4 rating(s)
£4.96
diameter
length
  • Type wire
  • material titanium
  • operation area Shipbuilding...
  • Material number 3.7035
  • EN Titanium...
Stainless steel sheet 0.3-20mm (Aisi - 316L(V4A) / 1.4404) Sheet...
  • Wnr. 1.4404; AISI 316L (V4A); EN X2CrNiMo17-12-2; US 31603;
  • Main areas of application: chemical industry (equipment for media containing chloride); food industry (dairies, breweries); sanitary facilities; sewage treatment plants; compressed air systems; paper and textile industry;
  • Properties: ready for use at temperatures up to 450 °C; easy to weld, polish and form; resistant to non-oxidizing acids; insensitive to pitting corrosion; not subject to intergranular corrosion;
  • density 8.0 g/cm³; tensile strength 500-700 MPa; yield strength ≥ 200 MPa;
  • Available cut or made to measure.
(5/5) on 5 rating(s)
£0.97
Thickness / Strength
length
width
  • Type sheet
  • material stainless steel
  • Material number 1.4404
  • EN X2CrNiMo17-12-2
  • US S31603
Titanium Grade 5 Titanium rod Ø0.8-90mm Round rod 3.7165 B348 Solid...
  • Diameter from 0.8mm to 70mm. Length from 0.1 meter to 2 meters.
  • Applications: industrial sector; medical technology (surgical implants); ultrasonic technology (sonotrodes and various components); marine; engine technology (various components); outdoor and sports (bicycles, racing vehicles, etc.); watch and jewelry industry.
  • If your desired length/width is not listed, select the next larger length/width. Leave your order a comment with the length/width you want. We will cut according to your measurement.
  • Dimension tolerances: +/-2mm.
  • Didn't find the sizes you need? Just contact us! We will be happy to help you with your request.
(5/5) on 4 rating(s)
£0.70
diameter
length
  • Type Round bar
  • material titanium
  • operation area Aerospace;...
  • Material number 3.7165
  • EN Titanium...
-5%
Spring Steel Wire 0.3mm-2.25mm Spring Wire EN 10270-1 Grade DH...
  • Size: 0.3-7mm. Length from 1 meter up to 100 meters.
  • Fields of application: Spring production (compression springs, extension springs, torsion springs); wire bending parts.
  • Grade standard EN 10270-1-DH.
  • Tensile strength 0.30 mm - 2660-2940 N/mm²; 0.60 mm - 2410-2670 N/mm²; 0.80 mm - 2310-2560 N/mm²; 1.00 mm - 2230-2470 N/mm²; 1.20 mm - 2170-2400 N/mm²; 1.50 mm - 2090-2310 N/mm²; 1.80 mm - 2020-2240 N/mm²; modulus of elasticity approx. 206 kN/mm²; modulus of shear approx. 81.5 kN/mm².
  • Did you not find the desired sizes? Just contact us! We will be glad to help you with your request.
(5/5) on 4 rating(s)
£4.71
From: £4.71
£4.96
diameter
length
  • Type wire
  • material Spring steel
  • operation area Spring...
  • Quality standard 10270-1-DH
  • density 7.85 kg / dm³
Spring plate 0.5mm-3mm spring band 1.1248 spring plate C75S cut...
  • Thickness from 0.5 to 3mm. Length from 100mm up to 1000mm.
  • Areas of application: shaped springs; leaf springs; spring clips; retaining springs; flat springs.
  • If your desired length/width is not listed, select the next larger length/width. Leave a comment on your order with the length/width you want. We cut according to your measurements.
  • Dimensional tolerances: +/-2mm.
  • Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.
(5/5) on 4 rating(s)
£2.59
Thickness / Strength
length
width
  • material C75S
    Spring...
  • operation area Spring...
  • Quality standard DIN EN 10132-4
  • Dimensional standard EN 10140
  • Material number 1.1248
Copper rod Ø0.4-400mm Cu-ETP Copper round rod CW004A (Cu-ETP -...
  • Diameter from 2mm to 50mm. Length from 0.1 meter to 2 meter.
  • Fields of application: Heating and cooling technology (heating and cooling elements); construction (as decoration for interior cladding and facades); electrical wires; wire windings and chokes/coils.
  • If your desired length/width is not listed, select the next largest length/width. Leave your order a comment with the length/width you want. We will cut according to your measurement.
  • Dimension tolerances: +/-2mm.
  • Didn't find the sizes you need? Just contact us! We will be happy to help you with your request.
£0.70
diameter
length
  • Type Round bar
  • material copper
  • Status Z4...
  • operation area Heiz- und...
  • Material number 2.0065
Tungsten wire 99.95% dia 0.008-6.35mm Element 74 pure metal...
Last items in stock
  • Diameter from 0.008mm to 6.35mm. Length: from 1 meter to 25 000 meters.
  • Areas of application: high-temperature furnace construction; lighting technology; Electrical engineering; Manufacture of jewelry.
  • Purity 99.95%.
  • density 19.25 g/cm³; melting point 3422 °C; thermal conductivity 164 W/(m·K); electr. Resistance 0.055Ω mm²/m.
  • Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.
(5/5) on 6 rating(s)
£1,557.50
diameter
length
  • Type wire
  • material tungsten
  • purity 99.95%
  • operation area High...
  • density 19.25 g / cm³

In the category Categories, Evek GmbH offers a wide range of products with the following features: tensile strenght: 500 MPa. All products meet international quality standards and are immediately available. We guarantee optimal prices and reliable delivery to any city.

With Categories from Evek GmbH, you will find the perfect combination of quality, price, and availability. Our range is regularly updated, ensuring you always receive the latest products directly from our specialized warehouses. Whether standard products or custom solutions, we are your reliable partner.

Moreover, we place great emphasis on individual customer service and offer flexible ordering options to meet your specific needs. Whether you need small or large quantities, Evek GmbH is your reliable partner for purchasing Categories, tensile strenght: 500 MPa. Benefit from our years of experience in the metal trade and our comprehensive logistics for timely and secure delivery.

FAQ

❤ How is the delivery of goods from Categories category?

All shipping information is available on the page Shipping.

❤ What discounts does Evek Shop offer for Categories buyers?

All relevant information regarding the discount program is presented on the page Discount.
Durchschnittliche Bewertung
5
review(s): 1
  - 1 bewertungen
  - 0 bewertungen
  - 0 bewertungen
  - 0 bewertungen
  - 0 bewertungen
5
/ 1