stainless steel

Stainless steel mesh 300-400Mesh Wire mesh 1.4404 V4A 316 L X2CrNiMo17-12-2

• Area of application: food processing, medical technology, fittings, petrochemical industry, pharmaceutical industry, electronics;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

Welding wire 1.4332 VA 309 stainless steel Ø 1-5mm WIG TIG welding rods electrodes

Stainless steel wire Ø 0.035 to Ø 0.05 binding wire 1.4430 garden wire 316l craft wire

• Wnr. 1.4462; AISI 318LN; US S31803;

• Field of application: onshore & offshore areas; Shipbuilding; construction industry; chemical and petrochemical industry; Apparatus and container construction;

• Properties: good resistance to pitting, stress corrosion cracking and sea water; high yield strength; magnetic and polishable; moderately forgeable and readily weldable; very good mechanical properties;

• density 7.8 g/cm³; tensile strength 650 - 880 MPa; thermal conductivity 15 W/(m·K); electr. Resistance 0.8Ω mm²/m.

• Available cut or made to measure.

• Wnr. 1.4841; AISI 314

• Area of application: high-temperature components in furnace, apparatus and mechanical engineering; chemical industry; automotive industry; petroleum and chain industry;

• Properties: good mechanical and strength properties; chemically resistant up to approx. 1100°C; good weldability; good forgeability and average machinability; very good scaling resistance in air;

• density 7.9 g/cm³; melting point 1330 °C; tensile strength 550 - 750 MPa;

• Available cut or made to measure.

• SW: 7-60mm;

• Possible applications: valve construction; dairies and breweries; decorative uses and kitchen furnishings; chemical apparatus construction; swimming pool construction; automotive industry;

• If your desired length/width is not listed, select the next larger length/width. Leave a comment on your order with the length/width you want. We cut according to your measurements.

• Dimensional tolerances: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• SW: 19932mm;

• Applications: offshore industry; chimney construction; pulp and paper industry; chemical industry; swimming pool technology; watch industry;

• If your desired length/width is not listed, select the next larger length/width. Leave a comment on your order with the length/width you want. We cut according to your measurements.

• Dimensional tolerances: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Applications: automotive industry; Chemical industry; Food industry; valve construction; Mechanical engineering; plant construction; Architecture; paper industry; textile industry;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Possible applications: mechanical engineering; pump parts; chemical and petrochemical industry; Energy Technology; plant construction; Environmental engineering; Aerospace Engineering;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Field of application: food processing; petrochemical industry; Apparatus and container construction; paper and pulp industry; chemical industry;;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Field of application: food processing; chemical and petrochemical industry; paper and pulp industry; seawater desalination plants; Mechanical engineering; Shipbuilding; construction industry;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Area of application: oil and gas industry; chemistry and petrochemistry; bioindustry; food industry; water purification and desalination plants; paper processing industry;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Area of application: Marine technology; paper and pulp industry; Shipbuilding; construction industry; chemical industry; good polishability; medical industry;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Field of application: chemical industry; pharmaceutical industry; oil and gas industry; Mechanical engineering; construction industry; Shipbuilding;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Field of application: food industry; automotive industry; Chemical industry; container and apparatus construction; Construction industry; aviation and mechanical engineering;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Typical areas of application for 1.4542 round bar are: aerospace; medical technology; Mechanical engineering; oil and gas industry; chemical industry; Food industry; Shipbuilding;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Field of application: food industry; chemical industry; sulfur filter and sulfur purification parts; oil and gas production platforms; brine treatment plants; Mechanical engineering; Shipbuilding;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Area of application: Apparatus and plant construction; Food industry; power plant construction; dairy plants; Mechanical engineering; power generation; chemical and pharmaceutical industry;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.

• Applications: construction industry; chemical industry; Shipbuilding; Food industry; pipeline construction; Pharmaceutical Industry;

• If your desired length is not listed, select the next larger length. Leave a comment with your order with the length you want. We cut according to your measurements.

• Tolerance in cutting: +/-3mm.

• Didn't find the sizes you wanted? Just contact us! We are happy to help you with your request.