Technical specifications:
Brand: | Evek |
Manufacturer number: | Not applicable |
Type: | Square bar |
Material: | copper |
Operation area: | Heating and cooling technology (heating and cooling elements); Construction (as decoration for ambience, facades, etc.); Electrical engineering and apparatus engineering; Shipbuilding and mechanical engineering; electric lines; Wire windings and chokes / coils |
Standard classifications: | |
Material number: | 2.0065 |
US: | CW004A |
EN: | Cu-ETP |
Further information: | |
Density: | 8.93 g / cm³ |
Melting point: | 1083 ° C |
Thermal conductivity: | 394 W / m K |
Electrical conductivity: | 57 MS / m |
Electrical resistance: | 0.018 Ω • mm² / m |
Condition: | half hard / hard |
Surface: | smooth (may contain handling or storage tags) |
Description:
Square copper rod with the material designation Cu-ETP is an electrolytically refined and oxygen-containing copper. The copper content is at least 99.9%. The oxygen content is max.0.04%. This makes the material unsuitable for welding due to hydrogen embrittlement. The material has excellent cold and hot formability and is excellent for soft soldering. Brazing in a reducing atmosphere and machinability are not recommended.
Thanks to its high electrical conductivity and high thermal conductivity, copper rods are used for heating technology (radiators, heat exchangers), electrical machines (electric motors, chokes / coils) and components (terminals, contact carriers).
Square bar is widely used for:
- Heating and cooling technology (heating and cooling elements);
- Building construction (as decoration for interior cladding and facades);
- Electrical engineering and apparatus engineering;
- Shipbuilding and mechanical engineering;
- electric lines;
- Wire windings and chokes / coils.
Copper square bar has the following properties:
- excellent cold and hot formability;
- excellent processing properties;
- excellent soft solderability;
- good corrosion resistance;
- not suitable for welding;
- cannot be brazed in a reducing atmosphere;
- poor machinability.