Stainless steel spring wire 1.4310 on spools
zoom_out_map
chevron_left chevron_right
-5%

Spring steel wire 0.1 - 10mm 1.4310 / AISI 301 – stainless spring wire 1-500 meters

check 2501 Product Sales
  • Material: Stainless steel 1.4310 / AISI 301, stainless.
  • Spring wire as cut-to-length material for tension, compression, and cantilever springs as well as springy wire-bending parts.
  • Strength and spring-back must be considered when selecting the wire diameter and when bending.

$6.15 Tax included

6.148387 Tax excluded

$6.47 -5%

 Customer ratings and reviews
Average rating
5
review(s): 5
  - 5
  - 0
  - 0
  - 0
  - 0

Spring steel wire made of stainless steel 1.4310

This spring wire is made from austenitic chromium-nickel stainless steel 1.4310. The material is used for springs and other elastically loaded parts. Compared to unalloyed spring steel, it offers higher corrosion resistance.

Processing and applications

The strength of 1.4310 is significantly influenced by cold forming. Therefore, when winding and bending, the wire diameter, the available strength, and the spring-back must be taken into account. The material number alone does not determine a specific spring force.

The stainless spring wire is a semi-finished product for tension, compression, and cantilever springs as well as for springy wire-bending parts. For your own designs, the wire thickness and shape must match the intended load. From this, no general application temperature or service life can be derived.

Chemical composition (in %)

C Si Mn P S Cr Ni N Mo
0.05-0.15 2.0 2.0 0.045 0.015 16.0-19.0 6.0-9.5 0.11 0.80

Execution notes

Important: The wire is delivered on a spool, but in certain cases without a spool in a ring (coil). If a spool is mandatory for you, please inquire before ordering.

Note! The spring steel wire with a diameter of 0.40 mm & 0.55 mm has a diameter tolerance of +/-0.008 mm; with 0.65 mm, 0.70 mm, 0.75 mm and 0.95 mm - +/-0.01 mm; with 1.30 mm - +/-0.015 mm

Diameter tolerances of 0.25mm and 0.35mm are -0/+0.01mm

Other spring wire materials

For applications with unalloyed spring steel, you can also find spring steel wire EN 10270-1 DH. The choice of material depends on load, processing, and environmental conditions.

Evek GmbH
139-134262
Type
Wire
material
Stainless steel
operation area
Spring production; handicrafts; vehicle construction; food industry; production of electrical components; watch parts
Quality standard
EN 10270-3
Material number
1.4310
EN
X10CrNi18-8
US
S30100
AISI
301
density
7.9 g/cm³
Melting point
1420 °C
Thermal conductivity
14.7 W/(m-K)
Electrical resistance
0.70 Ω mm²/m
Electrical conductivity
1.5 MS/m
tensile strenght
0.40 mm - 2250-2587 N/mm²; 0.70 & 0.75 mm - 1950-2242 N/mm²; 0.55 & 0.65 mm - 2000-2300 N/mm²; 0.95 mm - 1900-2185 N/mm²; 1.30 mm - 1800-2070 N/mm²
surface
low-slip CWC
You might also like
 Reviews
By luigic72 L. on  (Spring steel wire 0.1 - 10mm 1.4310 / AISI 301 – stainless spring wire 1-500 meters) :
(5/5) 

fast shipping, gladly again...

fast shipping, gladly again

Report abuse
By schuro4ick S. on  (Spring steel wire 0.1 - 10mm 1.4310 / AISI 301 – stainless spring wire 1-500 meters) :
(5/5) 

Thank you for the fast deliver...

Thank you for the fast delivery, gladly again

Report abuse
By galant200 G. on  (Spring steel wire 0.1 - 10mm 1.4310 / AISI 301 – stainless spring wire 1-500 meters) :
(5/5) 

Great product. We recommend...

Great product. We recommend

Report abuse